beautypg.com

Gf-131 aerco control system (acs) – AERCO Control System (ACS) User Manual

Page 28

background image

MC2: 04/23/13 Page 28 of 144

GF-131

AERCO Control System (ACS)

AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, New York 10913 • Phone: 800-526-0288

Installation, Operation, and Maintenance Manual

OMM-0081_0D

METHOD B – TERMINATION ACTIVATED AT I/O BOX

Figure 2-8: RS485 (Modbus) Wiring For KC1000 Boilers (Sheet 2 of 2)

NOTE

Do not terminate the shields of

the RS485 leads to the ground

(GND) terminal. The shields

must be terminated at the

source ends only. Connect the

shields of the incoming and

outgoing RS485 leads

together.

Connect 120 OHM,

½ Watt resister

between + and –

RS485 terminals on

the LAST C-More

Box.

I/O Board