KEYENCE N-400 - Manual (Page 45)

Chapter 3 N-400 Setup Procedure
37
3
Entering a value
After clicking in the frame, enter a value using the keyboard.
If the entered value exceeds the setting range, an error message is displayed.
(
➮ See p. 55.)
Entering characters
When you click in the frame labeled “ASC”, you can enter characters using the
keyboard.
When you click in the frame labeled “HEX”, you can enter characters using hexa-
decimal numbers (00 to 7F). This function is used to enter control characters (00 to
21h ASCII codes, such as [CR] and [STX]).