Hardy HI 6500 Series - Manual (Page 49)

Network Configuration 41
•
•
•
•
•
•
Step 7. From the DISPLAY drop down, select the Long Inverse selection. This will allow
us to write an integer value into the non-float registers.
Step 8. From the FUNCTION drop down list select Read/Write registers, or click button
23 to open the Write multiple registers display.
Step 9. Double click on the first register and the Enter Value box appears. Enter the new
value you wish to write to this register. Our example shows writing a value of “2”,
which is the Tare command number.