Hardy HI 6500 Series - Manual (Page 20)

12 Chapter 3
•
•
•
•
•
•
Mounting the Front Panel Display
Step 1. Make sure that all Electrostatic Discharge (ESD) precautions are taken before and
during installation.
Step 2. A thin plastic template comes with the product. Make the hole pattern in the panel
door or cover using the dimensions provided on the diagrams below.
Panel Hole Dimensions (not displayed to scale)
A printable template is available on the Hardy website. Printers and copy machines can
distort or reduce the template measurements shown above. If you are not using the plastic
template included with the product, verify the dimensional accuracy of any paper template
before use.
CAUTION: We recommend installing the HI 6500 in a NEMA 4, 4X or IP 55 rated enclosure or better.
ATTENTION Nous vous recommandons d'installer le HI 6500 dans un boîtier NEMA 4, 4X ou IP 55
ou mieux.