Hardy HI 6500 Series - Manual (Page 17)

Installation 9
•
•
•
•
•
•
Chapter 3
• • • • • •
HI 6500 Installation
Chapter 3 covers unpacking, cabling, interconnecting, configuring, and installing the HI
6500 series of instruments. User and service personnel should read this chapter before
installing or operating the weighing functions of the instrument.
Unpacking
Step 1. Before signing the packing slip, inspect the packing for damage, and report
damage of any kind to the carrier company.
Step 2. Check to see that everything in the package matches the bill of lading.
Step 3. If items are missing or you have any questions, contact Customer Service at:
Hardy Process Solutions
9440 Carroll Park Drive
San Diego, CA 92121
Phone: (800) 821-5831

International: (858) 292-2710
FAX: (858) 278-6700
Web Site: http//www.hardysolutions.com
E-Mail: [email protected]
Step 4. Record the model number and serial number of the HI 6500 series instrument.
Store them in a convenient, secure location for reference when contacting Hardy
Customer Service Department or to buy parts or firmware upgrades
WARNING - EXPLOSION HAZARD - SUBSTITUTION OF COMPONENTS MAY
IMPAIR SUITABILITY FOR DIVISION 2.
AVERTISSEMENT – Risque d’explosion – La substitution de composants peut
diminuer la conformité pour la Division 2
WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT
UNLESS POWER HAS BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE
NON-HAZARDOUS
AVERTISSEMENT – Risque d’explosion – Ne pas débrancher l’équipement à
moins que l’alimentation soit coupée ou que la zone ne présente pas de risques