Hardy HI 6500 Series - Manual (Page 107)

Instrument Configuration 97
•
•
•
•
•
•
NOTE All the samples must be the same weight, type and size.
Be sure the scale has been Zero’d before determining piece count.
Hint: When the weight of individual pieces varies, it is better to take the Weight Sample
of a larger number of pieces when the weight of individual pieces varies.
On the Web page: first select Count Enabled, and then either enter the weight of a unit in
the unit weight field, or use the weigh sample field entering the correct number of pieces in
the Sample size field as shown above. Then click on the weigh sample field.
Security Parameter Menu
A detailed description of the security features is provided in Chapter 8.
• Calibration Lock
o Calibration Lock
o Calibration Password
• Configuration Lock
o Configuration Lock
o Password
• Display Lock
o Display Lock
o Display Password
• Keypad Lock
o Keypad Lock
o Keypad Password
• Read Only Lock
o Read Only Lock
o Read Only Password
NOTE The security parameters can be accessed via the front panel display by entering a
preset password, or directly through the network connection. There is no way to
bypass the security password. We recommend you keep your passwords in a secure
location.
The security menu allows the user to lock out different levels of the menu hierarchy.
The user-configurable security settings only limit access through the front panel to
ensure the consistency of the instrument setup and weighing process. Parameter
configuration through the network is unaffected by these security settings.
The factory default for the security menu is to disable all lock modes and to preset each of
the security passwords to 1234. Below is another example where each password in the
security menu is different.