Hardy HI 6500 Series - Manual (Page 48)

40 Chapter 4
•
•
•
•
•
•
The red “No Connection”
disappears and the values at
the top of the page start to
change.
You are now connected from
your PC to the HI 6500
weight processor.
Step 5. Step 5. On the Setup pull
down menu select Poll
Definition and select the
function 04 INPUT
REGISTER and the Adress 0
and Length as 24..
Step 6. On the Hardy Modbus-Link
page. Display pull-down
menu, select Float Inverse.
The Weight value would be
found in register 5 (net) or 6 (gross). Other registers are not float values so be
aware of random numbers in other registers.