Hardy HI 6500 Series - Manual (Page 25)

Installation 17
•
•
•
•
•
•
View from the front of the instrument showing the display connector.
DIN Rail Mount
Exploded View of the DIN Rail Mount Assembly
NOTE The DIN Rail mount can be used with a remote display or operated as a Blind unit
Step 1. Pull down the DIN rail clip to expose the DIN Rail bracket. Do not fully remove the
clip from the housing.
Step 2. Hook DIN rail bracket onto the DIN rail using the groove at the top of the bracket
Step 3. Push the DIN rail clip up until it locks in place.