Hardy HI 6500 Series - Manual (Page 110)

100 Chapter 5
•
•
•
•
•
•
NOTE If the keypad is locked, then the tare, zero, mode, and configuration buttons are
disabled
On the Web page, on the security web page, select the Display Lock parameter, then select
either Enable or Disable from the drop down list.
On the HI 6500 series instrument display, select the security menu and use the UP or
DOWN button to select the Display Lock submenu, enter the password and then select the
Display Lock parameter. To ENABLE the Display Lock parameter, press the ENTER
button.
Display Password Parameter
The Display Password is a four alphanumeric character sequence. If the sequence is not
entered correctly through the front panel display the menu leaves the Display Lock
submenu.
On the Web page, select the security menu, the Display Password will be shown on the
security web page. To change the Display Password, left click inside the text field and enter
the new four character alphanumeric password.
On the HI 6500 series instrument display, select the Security menu and use the UP or
DOWN button to select the Display Lock submenu. To change the current password press
the ENTER or RIGHT button and enter the current password, then simply enter the new
password and press the ENTER button. Press the ENTER button to save and exit this
submenu and return to the top level security menu.
The Keypad Lock Parameters
Keypad Lock Parameter
The Keypad Lock disables the front panel keypad. If the ENTER button is pressed, a
password dialog box is shown on the screen. If the correct password is entered the Keypad
is unlocked. If the ENTER button is pressed again the Keypad Lock parameter is reset to
its original locked state.
On the Web page, on the security web page, select the Keypad Lock parameter, then select
either Enable or Disable from the drop down list.
On the HI 6500 series instrument display, select the security menu and use the UP or
DOWN button to select the keypad lock submenu. Enter the password and then press the
ENTER button. Select ENABLE and press the ENTER button to save and exit this
submenu.