Benelli ETHOS Shotgun - Manual (Page 52)

NOTE: when choke is correctly mounted, it must
not protrude from the barrel’s muzzle (fig. 61).
NOTE: before re-using the shotgun, make sure
that the choke wrench has been removed from
the barrel’s muzzle (fig. 62).
Before the shotgun is put away, cleaning the
internal choke and relative barrel thread is
recommended.
Benelli chokes are marked for an easy identifi-
cation (fig. 63). Notches on the frontal part of
each choke allow a quick recognition, even
when the choke is mounted on the shotgun.
NOTE: before using steel shot cartridges, make
sure that the choke fitted in the barrel is marked
“STEEL SHOT – OK” (see table above).
51
58
59
60
61
62
N OTCHES C HOKE S YMBOL
S TEEL
S HOT
I Full X NO
I Full - Steel Shot - OK X OK
II Improved Modified XX NO
II Improved Modified - Steel Shot - OK XX OK
III Modified XXX OK
IIII Improved Cylinder XXXX OK
IIIII Cylinder XXXXX OK
A Notches B Symbol
63