Cq-vad9300u display unit (rear), Rear view camera control unit (option), Camera input – Panasonic CQ VAD9300U User Manual
Page 93: Hide-away unit (front), Connecting the reverse lead
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Note: Refer to the operating instructions for the connected devices, in addition.
CQ-VAD9300U
Display Unit (Rear)
Rear View Camera
Control Unit
(option)
Camera input
“T1
Rear View Camera
(option)
Hide-away Unit
(Front)
(Video)
(Yellow)
RCA Cord (Option)
Connecting the Reverse Lead
If using an optional rear view camera, the reverse lead must
be connected.
Connect the reverse lead (violet/white stripe) to the positive (+)
lead of the reverse lamp (the lamp with a clear lens that lights
when the transmission gear is shifted into the reverse position).
Notes:
• Connect the reverse lead after cutting the terminal at the end.
• Use a Reverse Extension Cord ® if needed.
Check the reverse lamp.
it out ot the back of
tail lamp mount.
Car chassis
Reverse Lead (Violet/white stripe)
Transmission gear
Cut here
CQ-VAD9300U
93