Setting, Sirius set, Setting up sirius – Panasonic CQ VAD9300U User Manual
Page 69: Category category priority setting, A1 [v
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The following settings can be performed only when the Sirius mode is activated and a Sirius receiver unit is
connected.
K
[MODE]
(End)
[MENU]
[A1 [V]
[<][>]
(Select)
[ENTER]
Notes:
• Press [MODE] to return to the regular mode.
• The display returns to the previous one if there is no
operation for more than 60 seconds after changing to
the setting menu.
Setting
SIRIUS SET
Setting up Sirius
ON
OFF
: Sirius ON.
: Sirius OFF.
SELECT ENTER'SET U00E:EN0
® Press [>] or [<] to select the
setting.
(D Press [ENTER] to set.
Notes:
• “NOT CONNECTED” appears if a Sirius receiver unit is not connected.
• Even if the Sirius receiver is connected, Sirius mode would not be active
properly unless Sirius Setting is set to ON. (The picture which is shown
when CD changer mode is active may be displayed)
K
J
/
SEARCH SETUP
SELECT £NTER:fiET UODE^END
® Press
[A]
or
[V]
fo select
an item.
d) Press [>] or [<] to select the
setting.
(D Press [ENTER] to set.
SEARCH SETUP
Tuning method setting
ALL
every channel can be selected even if it is not included in the
agreement.
SUBSCRIBED : only channels covered by the agreement can be selected.
CATEGORY
Category priority setting
; a channel can be selected from every category.
; only channels in the current category can be selected.
ALL
The SIRIUS ID is required when making an agreement or making a change in the
agreement.
Press [ENTER] to return to the menu display.
Note: The screen shown at left does not return to the menu unless [MODE]
is pressed.
CQ-VAD9300U
69