Setting, Direct image capture (oniy for remote control), Setting k – Panasonic CQ VAD9300U User Manual

Page 53: Direct image capture, A] [v

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

[MODE]

(End)

[MENU]

[A] [V]

[<][>]

(Select)
[ENTER]

Notes:

• Press [MODE] to return to the regular mdde.
• The display returns to the previous one if th’ere is no

operation for more than 60 seconds after changing to

the setting menu.

Setting

® Press [>] or [<] to select a save area.

• You can store five images at maximum.
• The existing image is replaced v/ith a new image when saving an image in

an area. Check the right-hand smaller image on the screen before saving a

new one. If you would like to keep the existing image, do not overwrite.

i MflGEi

j^1R0E5i^airg]^^Jf:l_fi[iE5::CflS[EL i

r"C6PtUREr7riEL£CT ENTER^S^T^niODE:

® Image saving completed.

Notes:

• Do not turn off the unit while saving an image.
• To capture an image from TV, the broadcasting condition should be fairly

well.

ENTER:SET UOD£:END

[OSD]
(CAPTURE)

Direct Image Capture

(Oniy for remote control)

If you would like to capture a picture, press and hold [OSD] (CAPTURE) for
more than 2 seconds.
Subsequent steps are the same as the steps @ described above.

CQ-VAD9300U