Tilt, Tilting angle adjustment, Navi input – Panasonic CQ VAD9300U User Manual
Page 41: Navigation input, Navi volume, Navigation volume, I] h] e, Setting, Al [vi, V] [a
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
[MENU]
[Al [VI
[ < ] [ > ]
(Select)
[ENTER]
Notes:
• Press [MODE] to return to the regular mode,
• The display returns to the previous orre if there is no
operation for more than 60 seconds after changing to
the setting menu.
Setting
TIIT/SLIDE
K
k
TILT
Tilting angle adjustment
[V]
[A]
Press
[V] or [A]
to select the setting.
[T] [Y] H] [3 [Tj
I SLIDE I
Front-rear position
Press [<] or [>] to select the setting.
Front „ p, Rear
[<] irjir [>]
FRONT
REAR
Notes:
• For smooth adjustment, make sure to first return the lateral angle to the neutral position and then adjust the tilt angle.
• Front-rear position “REAR" and tilt angle “5" cannot be selected at the same time.
• The monitor position setting menu can also be displayed by pressing the [TILT] button on the display unit for more
than 1 second. («> page 21)
w
m
7
I
NAVI SETUP
NAVI INPUT
Navigation input
RGB
VTR1
SELECT €NTER:SET UOOe:£ND
VTR2
: connected to the RGB input cord, or a car navigation system
not connected
: connected to the VTR1-IN
: connected to the VTR2-IN
© Press
[A] or tVl to
select
an item.
® Press [>] or [<] to select
the setting.
© Press [ENTER] to set.
Note: Make sure to select “RGB” when no car navigation is connected.
NAVI VOLUME
Navigation volume
0 [: the sound that a car navigation system generates does not come out,
I] H] E
[3
[E
volume level
Low
High
NAVI MUTE (dB)
Navigation mute level
; decrease 20 dB
0
: unchanged
-20
-10
; decrease 10 dB
— QO
; no sound
CQ-VA09300U
41