Panasonic CQ VAD9300U - Manual (Page 61)

[MODE]
(End)
[MENU]
Notes:
• Press [MODE] to return to the regular motfe.
• The display returns to the previous one if there is no
operation for more than 60 seconds after changing to
the setting menu.
lA] [V]
[<][>]
(Select/adjust)
[ENTER]
Setting
[A] [VI
(VOLUME)
K
/
FBD_N?Jl| 1 0 dS *
LL^TÉn t OdU'miMimiiji
fROM n ; DdB-lMIIHmili
H^iLIR Ì. QctU-imtrtlFililt
t vjn « actB-imiEiiim<
iUB LU i QdigHtUlEltmii
Ill ■nil«'
FRONT L Left front speaker output balance
mimi*,, " "
ONinw ± e ciB-fiiiiiiiim 0 1IIÌIIIIIIII4:
SPLEV^Ll «.^SELECT ADJUST UODE^END
® Press [A] or [V] fo select
an item.
CD Press [>] or [<] to adjust.
CENTER Center speaker output balance
CENTER ± 6dB-lll!liii|illoUiiiiiiim+
FRONT R
Righi front speaker output balance
FRONT R i 0 ci 8 -iìiiiiiiiììioiìTiimiM
R»SUR Right surround speaker output balance
R SUR li 0ciB-miimiiii 0111111111111 +
L*SUR Lett surround speaker output balance
L SUR ± 6 dB-mmiiim 0111111111111 +
SUB*W Subwoofer speaker output balance
SUB'LU ± 0 dB-miiiiiiiiioiiiiiiiiini+
A test signal (a continuous tone) is output from each speaker for approximately two seconds.
Adjust the output balance so that the tone appears to have the same volume from each speaker.
Adjusting the output balance:
Adjust the volume of all of the other speakers to the volume level of the speaker from which the test signal
appears to be the quietest.
• If the speaker setting is “NONE” or "NO” for a speaker, the test signal is not output and that speaker cannot be
selected. page 58)
• Press [A] or [V] (VOLUME) to adjust the volume of the test signal.
CQ-VAD9300U
61