Panasonic EZASC - Manual

Chip 3-Terminal Capacitor Array
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
I/O I/O I/O
3-Terminal Capacitors or EMI Filters
(4 line mounting)
I/O
EZASC: 0.8 mm pitch
EZANC: 1.27 mm pitch
RF Circuit
Digital Control Circuit
(EZA SC)
Prevent high frequency harmonic
noise to RF circuits
GND GND
Chip 3-Terminal Capacitor Ar ray
Type: EZASC
EZANC
■
Fea tures
1. Suitable for EMI suppression fi ltering
● The low residual inductance at high frequency range provides effective reduction of noise
● Equivalent noise reduction to the EMI fi lters with low cost design
2. Compact design for high density PWB assembly
● EZASC : 4.0 mm ҂ 2.1 mm ҂ 0.65 mm, 0.8 mm pitch
EZANC : 6.4 mm
҂ 3.1 mm ҂ 0.75 mm, 1.27 mm pitch
● Flat and square packages suitable for high speed automatic placement machine
3. Superior mountability with concave terminals
● Firm solder joint (2 times that of convex terminal type)
● Self-aligning placement during refl ow soldering
Digital cordless phone
■
Recommended Applications
● Digital equipment such as PCs, printers, HDD, PCMCIA cards, PDAs, and word processors
● Communication equipment, digital cordless phones, automobile phones, GSM, PHS, DECT
● Digital audio and video equipment
● Electronic musical instruments, and other digital devices
Feb. 2006