Setting, Libubhii ocib - iiiiiiimmmiio-i – Panasonic CQ VAD9300U User Manual
Page 57
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
[MODE]
(End)
[MENU]
Notes:
• Press [MODE] to return to the regular mode.
• The display returns to the previous one if there is no
operation for more than 60 seconds after changing to
the setting menu.
[A] tVl
[<][>]
(Select/adjust)
[ENTER]
Setting
lAI tVl
(VOLUME)
K
)
k
Press [<] or [>] to adjust the input level.
PE
LiBUBHii OciB - iiiiiiimmmiio
-I-
ADJUST UODS^END
-18 dB
-15 dB
-12 dB
-9dB
-6dB
-3dB
±0dB
input level
Lower
Normal
Notes:
• If the input level from VTR1A/TR2 is too high, the audio will not be output normally.
Adjust the input level so that “OVER” does not appear.
• After setting the input levei
The volume can be adjusted by pressing the
[A] or [Vl
(VOLUME) on the display unit or the remote control.
K
/
OFF
SELECT ENTER:$ET L\ODE:ENO
(D Press [>] or [<] to select
the setting.
CD
Press [ENTER] to set.
DVD
VTR1
VTR2
optical fiber cable is not used.
optical fiber cable is used for the DVD player of the unit.
optical fiber cable is used for an external device that is
connected to VTR1.
: optical fiber cable is used for an external device that is
connected to VTR2.
CQ.VAD9300U
57