8 configuring the redirection function, 8 configuring the redirection function -9, Configuring the redirection function – Panasonic NN46240-501 User Manual
Page 99
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Nortel Secure Router 8000 Series
Configuration Guide - Basic Configuration
5 User management
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
user-interface aux 0
The user interface view appears.
Step 3 Run:
auto-execute command
command
This command configures the auto-execute command.
—End
5.2.8 Configuring the redirection function
Do as follows on the router that the user logs on to:
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
user-interface [
ui-type ] first-ui-number [ last-ui-number ]
The user interface view appears.
Step 3 Run:
redirect
This command enables the Telnet redirection function.
—End
5.2.9 Configuring the call-in or call-out restrictions of the VTY
user interface
Do as follows on the router that the user logs on to:
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
user-interface [
ui-type ] first-ui-number [ last-ui-number ]
The user interface view appears.
Issue 5.3 (30 March 2009)
Nortel Networks Inc.
5-9