Panasonic NN46240-501 - Manual (Page 179)

9 Telnet and SSH
Nortel Secure Router 8000 Series
Configuration Guide - Basic Configuration
OQ NOTE
In the public key editing view, you can send the RSA public key generated on the client software that
supports SSH1.5 to the server. Copy and paste the RSA public key to the router that serves as the SSH
server.
9.3.6 Configuring basic authentication information for the SSH
user
Do as follows on the logon router:
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
ssh server rekey-interval h o u r s
This command configures the update time of the server key.
Step 3 Run:
ssh server timeout s e c o n d s
This command configures the timeout for SSH authentication.
Step 4 Run:
ssh server authentication-retries t i m e s
This command configures the retry time for SSH authentication.
—End
9.3.7 Authorizing the SSH user through the command line
interface
OQ NOTE
The SSH user can be authenticated through password mode or RSA mode. For information about
configuring command line authorization in password mode, see
Nortel Secure Router 8000 Series
Configuration Guide - Security (NN46240-600).
This section describes how to configure command line authorization in RSA mode.
9.3.8 Checking the configuration
Action Command
Check the public key in the local key pair
generated by the SSH server.
display rsa local-key-pair public
Check the RSA public key of the client. display rsa peer-public-key [ brief | name
key-name ]
Check the SSH status and session
information.
display ssh server { session | status }
9-12 Nortel Networks Inc. Issue 5.3 (30 March 2009)