Data preparation, Configuration procedures, 2 enabling the ftp server – Panasonic NN46240-501 User Manual
Page 143: 3 enabling the ftp server, 2 enabling the ftp server -6, 2 logging on to the ftp server -8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8 FTP, TFTP, and Xmodem
Nortel Secure Router 8000 Series
Configuration Guide - Basic Configuration
•
Power on the router.
•
Connect the FTP client with the server.
Data preparation
To configure FTP, you need the following data.
No.
Data
1
FTP user name and password
2
The file directory authorized to the FTP user
3
The timeout time of the FTP server
Configuration procedures
No.
Procedure
Enabling the FTP server
8.4.2 Enabling the FTP server
Do as follows on the router that serves as the FTP server:
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
ftp server enable
This command enables the FTP server.
—End
Configuring the basic ACL
Configuring the basic FTP ACL
8.4.3 Enabling the FTP server
Do as follows on the router that serves as the FTP server:
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
8-10
Nortel Networks Inc.
Issue 5.3 (30 March 2009)
1
2
3