Data preparation, Configuration procedure, Applicable environment – Panasonic NN46240-501 User Manual
Page 121: Preconfiguration tasks, 4 configuring batch, Configuration, 6 configuring prompt modes, Caution
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Nortel Secure Router 8000 Series
Configuration Guide - Basic Configuration
6 File system management
• Log on to the router at the client end.
Data preparation
To configure storage devices, you need the following data.
No.
Data
Device name
Configuration procedure
Do as follows on the router:
Step 1 Enter the user view.
Step 2 Run:
format
device-name
This command formats the storage device.
Step 3 Run:
fixdisk
device-name
This command fixes the storage device of the faulty file system.
—End
6.6 Configuring prompt modes
A
CAUTION
If you select quiet as the prompt mode of the file system, no prompt is displayed when an
incorrect operation is performed, such as deleting a file, which results in data loss.
Applicable environment
The system provides prompts for operations that can cause data loss or damage.
Preconfiguration tasks
Before you configure prompt modes, complete the following tasks:
•
Power on the router.
•
Log on to the router at the client end.
Issue 5.3 (30 March 2009)
Nortel Networks Inc.
6-9
1