Panasonic NN46240-501 - Manual (Page 67)

3 CLI overview
Nortel Secure Router 8000 Series
Configuration Guide - Basic Configuration
You can also specify the filtering mode when the information is displayed on the screen. If a
large amount of information is output and displayed on the screen, you can specify the
filtering mode in the prompt — More —.
• /regular-expression: Displays information that begins with the line that matches regular
expression.
• -regular-expression: Displays information that excludes lines that match regular
expression.
• +regular-expression: Displays information that includes lines that match regular
expression.
A
Regular expressions are used to filter the output. When using the metacharacter {}, if the
number of matching times exceeds the scope specified in {}, the matching times out and the
information cannot be displayed normally.
The system provides display commands for displaying the system status. When you display
the system status, you can add the regular expressions | { begin | exclude | include }
regular-expression to the specified commands to filter the information.
• begin regular-expression: Displays information that begins with the line that matches
regular-expression .
• exclude text: Displays information that excludes lines that match regular-expression.
• include text: Displays information that includes lines that match regular-expression.
3.2 Configuring the command line view
# Establish a connection with the router. If the router uses the default configuration, you can
enter the user view with the prompt
< N o r t e i >
.
# Type system-view to enter the system view.
< N o r t e l > system-view
[ N o r t e l ]
# Type aaa in the system view to enter the AAA view.
[ N o r t e l ] aaa
[ N o r t e l - a a a ]
CQ NOTE
The prompt Nortel indicates the default router name. The prompt <> indicates the user view, and the
prompt [] indicates other views.
Some commands that are implemented in the system view can also be implemented in the
other views; however, the function implemented is associated with the command view. For
example, the mpls command (for starting MPLS) can be run in the system view to enable the
MPLS capability globally. It can also be run in the interface view to enable the MPLS
capability on the interface.
Table 3-1 shows the command line views.
3-4 Nortel Networks Inc. Issue 5.3 (30 March 2009)