Panasonic NN46240-501 - Manual (Page 128)

Nortel Secure Router 8000 Series
Configuration Guide - Basic Configuration 7 Configuration file management
Run:
display saved-configuration [ last ]
The initial configuration of the router is displayed.
Using the display saved-configuration last command, you can view the configuration files
saved during in the previous startup. That is, the configuration files of the current startup are
displayed.
7.2.2 Viewing the current configuration
Do as follows on the router:
Run:
display current-configuration [ configuration [ configuration-type ] | controller
interface interface-type [ interface-number ] ] [ | { begin | exclude | include }
regular-expression ]
This command displays the current configuration of the router.
7.2.3 Viewing the running configuration in the current view
Do as follows on the router:
Run:
display this
This command displays the running configuration in the current view.
CQ NOTE
• The configuration file is displayed in the same form as the saved file.
• The display this interface command can only be run in the interface view.
7.3 Saving the current configuration
Do as follows on the router:
Run:
save [ configuration-file ]
This command saves the current configuration.
7.4 Clearing the running information
Do as follows on the router:
Run:
reset saved-configuration
This command clears the configuration file in the storage device.
Issue 5.3 (30 March 2009) Nortel Networks Inc. 7-3