3 configuring the system clock, 4 configuring the header text, 3 configuring the system clock -4 – Panasonic NN46240-501 User Manual
Page 83: 4 configuring the header text -4, Configuring the system clock, Configuring the header text, Do as follows on the router: step 1 run, This command configures the time zone. step 3 run, The system view appears. step 2 run
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4 Basic configuration
Nortel Secure Router 8000 Series
Configuration Guide - Basic Configuration
You can change the name of the router that appears in the command prompt.
4.2.3 Configuring the system clock
Do as follows on the router:
Step 1 Run:
clock datetime
HH:MM4:SS YYYY-MM-DD
This command configures the Universal Time Coordinate (UTC) standard time.
Step 2 Run:
clock timezone
time-zone-name {
add | minus }
offset
This command configures the time zone.
Step 3 Run:
clock daylight-saving-time
time-zone-name
one-year
start-time start-data end-time
end-data offset
Or:
clock
daylight-saving-time
time-zone-name
repeating
start-time
{{
first
|
second
|
third
|
fourth
|
fifth
|
last
}
weekday
month
|
start-date
}
end-time
{
end-year
month
{
first
|
second
|
third
|
fourth
|
fifth
|
last
}
weekday
month
|
end-date
}
offset
[
start-year
[ end-year ]
]
This command configures daylight saving time.
—End
To guarantee compatibility with other devices, you must accurately set the system time. You
can also configure the time zone and daylight saving time.
4.2.4 Configuring the header text
Do as follows on the router:
Step 1 Run:
system-view
The system view appears.
Step 2 Run:
header login { information
text
| file
file-name }
This command configures the header text during logon.
Step 3 Run:
header shell { information
text
| file
file-name
}
This command configures the header text after logon.
—End
4-4
Nortel Networks Inc.
Issue 5.3 (30 March 2009)