11 disconnecting ftp, 12 checking the configuration, 1 establishing the configuration task – Panasonic NN46240-501 User Manual
Page 150: Applicable environment, Preconfiguration tasks, Data preparation, 9 disconnecting ftp -11, 1 establishing the configuration task -12, 1 establishing the configuration task -13, Display ftp-server
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Nortel Secure Router 8000 Series
Configuration Guide - Basic Configuration
8 FTP, TFTP, and Xmodem
8.5.11 Disconnecting FTP
Perform the following steps, as required, on the router that serves as the client:
•
To disconnect the FTP connection and return to the user view, run:
bye
o r
quit
This command disconnects the remote FTP connection.
•
To disconnect the FTP connection and return to the FTP view, run:
disconnect
o r
close
8.5.12 Checking the Configuration
Run the following commands to check the preceding configuration.
Action
Command
Check the login FTP user.
display ftp-users
Run the display ftp-users command to view the user name, port number, authorization
directory of the FTP user configured currently.
< Q u i d w a y >
display ftp-users
u s e r n a m e
h o s t
p o r t i d l e t o p d i r
z l l
1 0 0 . 2 . 1 5 0 . 2 2 6
2 3 2 0
0 c f c a r d :
8.6 Configuring TFTP
8.6.1 Establishing the configuration task
Applicable environment
Configure TFTP to transfer files between the server and the client in a simple interaction
environment.
Preconfiguration tasks
Before you configure TFTP, complete the following tasks:
•
Power on the router.
•
Connect the TFTP client with the server.
Data preparation
To configure TFTP, you need the following data.
No.
Data
IP address of the TFTP server
Issue 5.3 (30 March 2009)
Nortel Networks Inc.
8-17
1