1 establishing the configuration task, Applicable environment, Preconfiguration tasks – Panasonic NN46240-501 User Manual
Page 53: Data preparation, Configuration procedures, 2 establishing the physical connection, 1 establishing the configuration task -6, 2 establishing the physical connection -6, 3 establishing the, Configuration environment
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2 Configuration environment setup
Nortel Secure Router 8000 Series
Configuration Guide - Basic Configuration
2.4 Establishing the configuration environment through
the AUX port
2.4.1 Establishing the configuration task
Applicable environment
If you cannot configure the router by local logon and no reachable route to other routers exists,
connect the serial port of the PC and the AUX port of the router through the modem.
Preconfiguration tasks
Before you configure the router through AUX port dial-up, complete the following tasks:
•
Prepare the PC/terminal (including the serial port and RS-232 cable).
•
Prepare the PC terminal emulation program (such as Windows XP HyperTerminal).
•
Prepare two modems.
Data preparation
To configure the router, you need the following data.
No.
Data
1
Type of terminals
2
Terminal communication parameters
3
Modem communication parameters
Configuration procedures
No.
Procedure
1
Establishing the physical connection
2
Initializing and configuring the modem on the interface
3
Configuring the connection between the remote terminal and the router
4
2.4.2 Establishing the physical connection
Step 1 Connect the modem with the PC and the network.
Step 2 Connect the modem with the router through the AUX port and the network.
—End
2-6
Nortel Networks Inc.
Issue 5.3 (30 March 2009)