Panasonic NN46240-501 - Manual (Page 101)

Nortel Secure Router 8000 Series
Configuration Guide - Basic Configuration 5 User management
Step 2 Run:
user-interface [ ui-type ] first-ui-number [ last-ui-number ]
The user interface view appears.
Step 3 Run:
authorization-cmd timeout timeout-value
This command configures the authorization and authentication timeout for the command line.
—End
The Secure Router 8000 Series supports HWTACACS command line authentication based on
the logon user level or the name of the SSH user.
When a user logs on to the router, every entered command should be authorized by the
HWTACACS server if command line authorization is configured. If the router receives no
authorization from the HWTACACS server before timeout, it processes the authorization as a
failure and the entered command cannot be run.
5.2.12 Disconnecting a user interface
Do as follows on the router that the user logs on to:
Run:
free user-interface { ui-number | ui-type ui-number1 }
This command disconnects the specified user interface.
5.2.13 Checking the configuration
Run the following commands to check the previous configuration.
Action Command
Check information about user
interface usage.
display users [ all ]
Check the maximum number
of VTY user interfaces.
display user-interface maximum-vty
Check the physical attributes
and configurations of the user
interface.
display user-interface [ ui-type ui-number ] [ summary ]
Issue 5.3 (30 March 2009) Nortel Networks Inc. 5-11