Yamaha FX770 - Manual (Page 60)

Section 7: Reference
Mix Balance
Output Level
Trigger
Left/Right Balance
High Freq. Ratio
Mixes between the Dry signal and the Delay effect (Setting this to 100% will produce only the chorus
effect.)
Overall Level of this Effect Block
Selects the Source of external control for the Tempo parameter. You can adjust the TEMPO parameter
value using the footswitch (by selecting FS2) or using the MIDI clock (by selecting MIDI).
Adjusts the pan position of the Delay effect if it is unbalanced due to a high DEF parameter value.
A “tape-echo” EQ for the delays. As the value increases, the high range of the repeated sound
attenuates gradually, resulting in a very natural echo.
NOTEL
r-O-
Lch Delay Time
NOTER
H>- -► Rch Delay Time
NOTEF
I
TEMPO
h#
—---------------- ► Feedback Delay Time
i-TRG-
■ OFF (OFF)
■TapTempo (FS2)
-MIDI Clock (MIDI)
Tempo Modulation Delay
Same as the Modulation Delay (MDL) with the addition of Tempo control.
Type 6: TMD (Tempo Modulation Delay)
Page 1 Page 2 Pages Page 4
TMD TEMPO NOTE TMD FB SPD DEP TMD MIN LOL TMD TRG HF
57