CANOGA PERKINS 9145EMP NID Software Version 4.0 - Manual (Page 96)

System Alarms & Logs 9145EMP NID Software User’s Manual
81
Chapter 6
System Alarms & Logs
6.0 System Alarms
Use the System Alarms screen to view alarms and faults on the 9145EMP.
To view alarm status, select System Alarms (4) from the Main Menu and press Enter. The
System Alarms screen (Figure 6-1) opens. Press Esc to return to the Main Menu.
Figure 6-1 System Alarm screen
Canoga Perkins Corp. Ethernet Network Interface Device 17-MAR-2011
9145EMP-761-4-0 V40.43 Canoga 9145EMP 32 device 11:20:59
-----------------------------------SYSTEM ALARMS-------------------------------
Link Remote Fault SFP
Transmitter
User Port 1 Up N/A N/A
User Port 2 Up N/A N/A
User Port 3 *** Down *** N/A N/A
User Port 4 *** Down *** N/A N/A
Network Port 1 Up No OK
Network Port 2 Up No OK
MGMT UTP Port *** Down *** N/A N/A
AC 120/240 PS Status OK 5.25 Volts Output (4.83 < OK < 5.49)
Main Board Voltages All mainboard voltages OK
Fan Status Both Fans Ok
Temperature Status OK 30.0C (0.0C < OK < 70.0C)
Press ESC to return to the previous menu