CANOGA PERKINS 9145EMP NID Software Version 4.0 - Manual (Page 40)

System Configuration 9145EMP NID Software User’s Manual
Trap Configuration
25
3.1.4.2 Delete a Trap Table Entry
1. To delete a Managing Host IP address, from the Trap Notification Destination Table
screen (Figure 3-9), type D and press Enter.
2. Press the Space bar to select a Host IP address. To delete, press Enter. You will be
prompted to confirm the deletion.
3. Press Esc to return to the IPSN MP Agent Configuration screen (Figure 3-2).
3.2 Trap Configuration
Trap configuration defines how various alarms events are handled. Traps can be configured to be
logged, sent to the SNMP managers in the Trap Notification/Destination Table, or both logged
and sent for each event. Traps can also be set to Disabled.
Trap Config Item Traps Affected MIB Location
Master Trap Control All
User Port Link Traps linkUp (User Port) ifmib.my
linkDown (User Port) ifmib.my
Network Port Link Traps linkUp (Network Port) ifmib.my
linkDown (Network Port) ifmib.my
Remote Fault Traps cp9145EPortRemoteFaultReceived cp9145EStatus.my
cp9145EPortSendingRemoteFault cp9145EStatus.my
cp9145EPortRemoteFaultCleared cp9145EStatus.my
Cold Start Traps coldStart v2-mib.my
Authentication Traps cpAuthenticationFailure cpMgmtStatus.my
Diagnostic Traps cpPortLoopbackOn cpLoopback.my
cpPortLoopbackOff cpLoopback.my
Entity Configuration Traps entConfigChange EntityMib.my
Fan/Power/Temperature
Traps
cpMainBoardVoltageLevelsOK cpStatus.my
cpMainBoardVoltageLevelsOutOfRange cpStatus.my
cpDyingGasp cpPowerSupply.my
cpPowerSupplyFailed cpPowerSupply.my
cpPowerSupplyOverHighLimit cpPowerSupply.my
cpPowerSupplyUnderLowLimit cpPowerSupply.my
cpPowerSupplyOK cpPowerSupply.my
cpFanShutDownDueToLowTemperature cpFanStatus.my