CANOGA PERKINS 9145EMP NID Software Version 4.0 - Manual (Page 164)

Service OAM 9145EMP NID Software User’s Manual
Maintenance Entity Groups
149
.
Figure 11-16 Create a New Maintenance Group screen
11.5.3 Delete a Maintenance Entity Group
When you delete a Maintenance Entity Group, all MEPs/MIPs associated with it are also deleted
from the AIS client lists.
1. On the Maintenance Entity Group List screen (Figure 11-15), type D and press Enter. The
current Maintenance Entity Group is highlighted.
2. Press the Space bar to scroll through the list and highlight the entry you wish to delete.
3. Press Enter to delete the highlighted Maintenance Entity Group. You are prompted to
confirm the deletion.
11.5.4 Modify a Maintenance Entity Group
1. On the Maintenance Entity Group List screen (Figure 11-15), type E and press Enter. The
current MEG is highlighted.
2. Press the Space bar to scroll through the Maintenance Entity Groups and highlight a
MEG to modify.
3. When the item you want to modify is highlighted, press Enter. The Maintenance Entity
Group Attributes screen (Figure 11-17) opens.
4. To change the CCM interval, type 1 and press Enter. The CCM interval is the interval at
which CCMs are sent by a MEP. Select 1 sec, 10 sec, or 100 ms, and press Enter.
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2011
9145EMP-761-4-0 V40.43 Canoga 9145EMP 32 device 05:15:27
--------------------CREATE A NEW MAINTENANCE ENTITY GROUP-----------------------
1) MEG ID: 2
2) Level: 1
3) Name:
4) Name Format: ICC-based Format
5) VLAN Tag Type: T-Tag
6) EVC Configuration Record: 1
7) CCM Interval: 1 sec
8) Permissions (Sender ID): None
Select [1-8], (A) to accept:
------------------------------------Messages-----------------------------------