CANOGA PERKINS 9145EMP NID Software Version 4.0 - Manual (Page 201)

9145EMP NID Software User’s Manual Configuring EVC
EVC Configuration
186
12.2.1 Create an EVC Record
1. On the EVC Configuration screen (Figure 12-2), type 1 and press Enter. The EVC
Record List screen (Figure 12-2) opens.
Figure 12-3 EVC Record List screen
2. To create a new record, type A and press Enter. The Create A New EVC Configuration
Record (Figure 12-4) screen opens.
3. In the S-VLAN field, type an ID number and press Enter. The User Interface field is
highlighted.
4. In the User Interface field, press the Space bar to select USR1, USR2, USR3, or USR4,
and press Enter. The Name field is highlighted.
5. In the Name field, type name for the record and press Enter. The Multiplexing Type field
is highlighted.
6. In the Multiplexing Type field, use the Space bar to select Service Multiplexing or All-to-
One and press Enter. The Administrative State field is highlighted.
7. In the Administrative State field, use the Space bar to select Up or Down. and press
Enter. The Statistics field is highlighted.
8. In the Statistics field, use the Space bar to select Disabled, S-VLAN, or C-VLAN and
press Enter. The S-Tag PCP Value field is highlighted.
9. In the S-Tag PCP Value field, use the Space bar to select Static, Copy from Ingress, or
Map from CVID, and press Enter.
10. In the Static/Default PCP Value field, specify a P-bits value between 0-7, and press Enter.
11. In the Tunnel VLAN field, use the space bar to enable or disable Tunnel VLAN, and press
Enter.
Canoga Perkins Corp. Ethernet Network Interface Device 21-MAR-2011
9145EMP-761-4-0 V40.43 03:06:11
-------------------------------EVC RECORD LIST-----------------Items 1 - 1 of 1-
S-VLAN USER MUX NAME STATS OPERATIONAL
ID PORT TYPE STATE
10 USR1 Service Mux soam Disabled DOWN
Select [(F)irst, (P)rev, (N)ext, (L)ast] to change pages,
(A)dd new, (D)elete, (E)dit, (S)tatistics, ESC to return:
------------------------------------Messages-----------------------------------