CANOGA PERKINS 9145EMP NID Software Version 4.0 - Manual (Page 127)

9145EMP NID Software User’s Manual CoS Configuration
CoS Queues Configuration
112
• If you selected C-VID in step 1, you can use the User Port Tagged Packet Classi-
fier Mapping screen (C-VID Mode) to select a port, change the queue assignment,
and view the C-VID. See the steps in “Untagged Packet Classifier Mapping” on
page 114.
Figure 10-5 User Port Tagged Packet Classifier Mapping (PCP Mode)
4. To map a PCP to a queue on the Network port, type 3 and press Enter. The Network Port
Tagged Packet Classifier Mapping screen (Figure 10-6) opens.
5. To change the queue setting, enter the PCP number and use the Space bar to select a
queue. Press Enter to confirm the setting. (Only a queue that is enabled can be selected.
Canoga Perkins Corp. Ethernet Network Interface Device 20-MAR-2011
9145EMP-761-4-0 V40.43 Canoga 9145EMP 32 device 11:20:59
----------- USER PORT TAGGED PACKET CLASSIFIER MAPPING (PCP MODE) --------------
PCP Queue
--- ---
0 Q1
1 Q1
2 Q1
3 Q1
4 Q2
5 Q2
6 Q3
7 Q3
Select [0-7]:
------------------------------------Messages-----------------------------------