CANOGA PERKINS 9145EMP NID Software Version 4.0 - Manual (Page 159)

9145EMP NID Software User’s Manual Service OAM
Maintenance Associations
144
Figure 11-13 Create a New Maintenance Association screen
11.4.3 Delete a Maintenance Association
When you delete a Maintenance Association, all MEPs/MIPs associated with it are also deleted.
An EVC record cannot be deleted if it has a MA or a MEG associated with it.
1. On the Maintenance Association List screen (Figure 11-12), type D and press Enter. The
current Maintenance Association is highlighted.
2. Press the Space bar to scroll through the list and highlight the Maintenance Association
you wish to delete.
3. Press Enter to delete the highlighted Maintenance Association. You are prompted to
confirm the deletion.
11.4.4 Modify a Maintenance Association
1. On the Maintenance Association List screen (Figure 11-12), type E and press Enter. The
current MA is highlighted.
2. Press the Space bar to scroll through the Maintenance Associations and highlight an MA
to modify.
3. When the item you want to modify is highlighted, press Enter. The Maintenance
Associations Attributes screen (Figure 11-14) opens.
4. To change the CCM interval, type 1 and press Enter. The CCM interval is the interval at
which CCMs are sent by a MEP. Select 1 sec, 10 sec, or 100 ms, and press Enter.
NOTE: No more than two MEPs at 100msec are supported. Typically, these MEPs are used at
MD level 0 to monitor the physical link.
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2011
9145EMP-761-4-0 V40.43 Canoga 9145EMP 32 device 00:25:46
-------------------------CREATE A NEW MAINTENANCE ASSOCIATION---------Display 1
1) MD ID: 1
2) MA ID: 2
3) Name: MA2
4) VLAN Tag Type: T-TAG
5) EVC Configuration Record 1
6) CCM Interval: 1 sec
7) Permissions (Sender ID): None
Select [1-7], (A) to accept:
------------------------------------Messages-----------------------------------