CANOGA PERKINS 9145EMP NID Software Version 4.0 - Manual (Page 27)

9145EMP NID Software User’s Manual System Configuration
IP/SNMP Agent Configuration
12
3.1 IP/SNMP Agent Configuration
The IP/SNMP Agent Configuration screen (Figure 3-2) configures the Management IP, Test IP,
and Auxiliary IP settings, and is used to add, edit, or delete Host Table and Trap Table entries.
The Management IP, Test IP, and Auxiliary IP Addresses are used for managing and conducting
testing on a TCP/IP network.
Figure 3-2 IP/SNMP Agent Configuration screen
3.1.1 Management IP Configuration
On the IP/SNMP Agent Configuration screen (Figure 3-2), type 1 and press Enter. The
Management IP Configuration screen (Figure 3-3) opens.
Use this screen to configure the Management IP of the 9145EMP, including the subnet mask,
gateway, and management VLAN, and to configure which ports can be used for management
access. See your network administrator for information and help with determining the appropriate
parameters.
1. Manager IP Address Sets the 9145EMP Manager IP Address.
Subnet Mask Sets the 9145EMP Manager IP Subnet Mask.
Default Gateway Sets the IP Address of the Default Gateway.
2. Manager Port Used to select the port(s) to allow Management Communication access.
Options are: Network Port, MGMT UTP Port, and Disabled.
3. Manager VLAN Tagging Enables or disables the use of a Management VLAN. The tags
are 802.1ad compliant. The default setting is Untagged. The options are:
• S-Tagged - An S-Tag, followed by the management payload
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2011
9145EMP-761-4-0 V40.43 Canoga 9145EMP 32 device 11:20:59
-------------------------------IP/SNMP AGENT CONFIGURATION---------------------
1) Management IP Configuration
2) Auxiliary IP Configuration
3) Host Table
4) Trap Table
Select [1-4]
------------------------------------Messages-----------------------------------