CANOGA PERKINS 9145EMP NID Software Version 4.0 - Manual (Page 137)

9145EMP NID Software User’s Manual CoS Configuration
CoS Queues Configuration
122
4. Type 3, 7 or 11 to set the Mid threshold percentage for the appropriate Drop Profile, use
Backspace to remove the current setting, type the desired setting, and press Enter.
5. Type 4, 8 or 12 to view the Match Criteria for the appropriate Drop Profile. The Match
Criteria screen (Figure 10-15) for the appropriate ED Drop Profile opens.
a. Press CTRL-T to select A profile or B profile.
b. Press CTRL-D to select DSCP or PCP menus.
c. Type the DSCP or PCP number, or a range of numbers, and press Enter to high-
light the Match column. Press the Space bar to select X (matched) or -
(unmatched) and then press Enter. The next entry is highlighted.
d. Press Esc to return to the bottom of the screen.
6. Press Esc to return to the ED Drop Profile Configuration screen.
7. Press Esc again to return to the Class of Service Queue Configuration screen.
To match a profile, a tagged IP packet must match both PCP and DSCP values.
Figure 10-13 User Port ED Drop Profile Configuration
Canoga Perkins Corp. Ethernet Network Interface Device 20-MAR-2011
9145EMP-761-4-0 V40.43 Canoga 9145EMP 32 device 11:20:59
--------------------USER SIDE ED DROP PROFILE CONFIGURATION---------------------
ED Drop Profile 3A:
1) MIN Threshold (%): 50
2) MAX Threshold (%): 100
3) MID Threshold Drop Probability (%): 50
4) Match Criteria
----------------------------------------------------
ED Drop Profile 2A:
5) MIN Threshold (%): 50
6) MAX Threshold (%): 100
7) MID Threshold Drop Probability (%): 50
8) Match Criteria
----------------------------------------------------
ED Drop Profile 1A:
9) MIN Threshold (%): 50
10) MAX Threshold (%): 100
11) MID Threshold Drop Probability (%): 50
12) Match Criteria
Enter CTRL-T to toggle profile A/B or select [1-12]:
------------------------------------Messages-----------------------------------