3 host table, 1 add or edit a managing host ip – CANOGA PERKINS 9145EMP NID Software Version 4.0 User Manual
Page 32

System Configuration
9145EMP NID Software User’s Manual
IP/SNMP Agent Configuration
17
3.1.3 Host Table
On the IP/SNMP Agent Configuration screen (Figure 3-2), type 3 and press Enter. The Host
Access Table screen (Figure 3-5) opens.
Use this screen to configure the 9145EMP to send and receive SNMP, FTP, and Telnet traffic to
the Managing Host IP address, and access from specific Telnet clients when Telnet security is
enabled. Use the Host Access Table to configure access by each host including access type and
privileges (SNMP, FTP, Telnet).
Figure 3-5 Host Access Table screen
3.1.3.1 Add or Edit a Managing Host IP
To add a Managing Host IP, from the Host Access Table screen, type A and press Enter. To edit
an existing Managing Host IP select Edit (E). To delete a Managing Host IP select Delete (D).
The Edit Host Access screen (Figure 3-6) opens.
1. Type the Managing Host IP address to add to the Host Access list and press Enter.
2. Type the IP Mask Size (default value 32) and press Enter. To have an entire subnet
access the 9145EMP, enter the mask size for the subnet.
3. To change Telnet Access, type 1 and press Enter. Press the Space bar to select Telnet
and SSH, Telnet Only, SSH Only, or None.
4. To change FTP access, type 2 and press Enter. Press the Space bar to select FTP and
SFTP, FTP Only, SFTP Only, or None. Press Enter to select the parameter.
5. To change SNMP Access parameters, type 3 and press Enter. Press the Space bar to
select Read, Write, or None. Press Enter to select the parameter.
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2011
9145EMP-761-4-0 V40.43 Canoga 9145EMP 32 device 11:20:59
--------------------------------HOST ACCESS TABLE------------------------------
Managing Host Telnet FTP SNMP SNMP V1/V2c Rd V1/V2c Wr V1/V2c
IP/Mask Bits Access Access Access Protocol Community Community Access
172.016.000.000/16 All All Write V1/V2c/V3 public private Superv
Select [(A)dd, (D)elete, (E)dit, (M)ore]:
------------------------------------Messages-----------------------------------