Lan settings, Wlan active/inactive, Wireless lan setup – Canon PIXMA MP560 User Manual
Page 757: Confirm lan settings
Advanced Guide
>
Changing the Machine Settings
>
Changing the Machine Settings on the LCD
> LAN settings
LAN settings
WLAN active/inactive
Activates/deactivates wireless LAN.
Wireless LAN setup
Selects the setting method for wireless LAN connection.
Note
You can enter this setting menu by following the procedure below:
1. Select Settings on the HOME screen, then press the
OK
button.
2. Select Wireless LAN setup.
In this case, activate wireless LAN.
Easy settings
Select when you perform settings for wireless LAN manually.
WPS settings
Select when you perform settings for wireless LAN using Wi-Fi Protected Setup (WPS). Select
Push button method or PIN method according to the method your access point supports, then
follow the on-screen instructions.
WCN settings
Select when you perform settings for wireless LAN using Windows Connect Now (WCN)
feature. You need a USB flash drive on which settings for wireless LAN are saved.
Confirm LAN settings
The list of wireless LAN settings of this machine is displayed on the LCD.
You can print the list from this setting menu.
Wireless LAN setting list
The list of wireless LAN settings of this machine is displayed on the LCD.
The following setting items are displayed.
Items
Setting (IPv4)
Setting (IPv6)
Connection
Active/Inactive
Active/Inactive
SSID
XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
Communication
mode
Infrastructure
Infrastructure
Channel
XX
XX
Wireless LAN
security
Disable/WEP(64bit)/WEP(128bit)/
WPA-PSK(TKIP)/WPA-PSK(AES)/
WPA2-PSK(TKIP)/WPA2-PSK(AES)
Disable/WEP(64bit)/WEP(128bit)/
WPA-PSK(TKIP)/WPA-PSK(AES)/
WPA2-PSK(TKIP)/WPA2-PSK(AES)
IP address
XXX. XXX. XXX. XXX
XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX
Subnet mask
XXX. XXX. XXX. XXX
-
Subnet prefix
length
-
XXX
Default gateway
XXX. XXX. XXX. XXX
XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX
MAC address
XX:XX:XX:XX:XX:XX
XX:XX:XX:XX:XX:XX
IPsec setting
-
Enable (ESP)/Enable (ESP & AH)/
Enable (AH)/Disable
Pre-shared key
-
XXXXXXXXXXX
Page 757 of 949 pages
LAN settings