Canon PIXMA MP560 - Manual (Page 66)

Advanced Guide Troubleshooting
Contents > Other Usages > Machine Settings
Machine Settings
This section describes the items you can set or change in Device settings of the Settings menu. For
details on setting or changing, refer to the on-screen manual:
Advanced Guide .
Plain paper feed settings
Selects the paper source (Rear Tray or Cassette) in which you load plain paper. The machine feeds
plain paper from the Cassette by default. Use this setting to change the paper source for plain
paper to the Rear Tray.
Print settings
Prevent paper abrasion
Use this setting only if the print surface becomes smudged.
Extended copy amount
Selects the amount of image that extends off the paper when making borderless copies.
Auto Photo Fix setting
Selects whether or not to prioritize printing Exif information saved on a photo when Auto photo fix ON
is selected.
LAN settings
WLAN active/inactive
Selects whether to activate or inactivate the wireless LAN.
Wireless LAN setup
Configures the wireless LAN connection according to an access point or connection environment. If
the access point supports the WPS (Wi-Fi Protected Setup), you can configure a wireless LAN
easily. The access point settings can also be configured manually.
For details, refer to the printed manual:
Getting Started.
Confirm LAN settings
Displays the wireless LAN configurations of the machine on the LCD, or prints this information from
the machine.
Other settings
Configures other network settings including the printer's network name, IPv4/IPv6 settings, memory
card sharing, WSD (Web Services on Devices) setting, etc.
Reset LAN settings
Sets the machine network settings back to the default.
Advanced settings
Page 66 of 949 pages Machine Settings