Canon PIXMA MP560 - Manual (Page 351)

Advanced Guide > Printing Using the Operation Panel of the Machine > Copying > Making Copies > Displaying the
Preview Screen
Displaying the Preview Screen
When you press the right Function button while Preview is displayed on the screen, you can preview an
image of the printout on the preview screen.
Important
The original will be scanned to display the preview image. Therefore, do not open the Document
Cover until the preview screen appears.
Originals are rescanned after displaying the preview screen and before copying starts. Therefore,
do not open the Document Cover or remove the original from the Platen Glass until copying is
complete.
1. Preview of the original
The original that is set on the Platen Glass is displayed. If the displayed image is skewed, refer to
Loading Paper / Originals and reset the original properly, then display the preview screen again and
preview the original.
2. Page size
A frame showing the selected page size appears over the image. The inside of the frame will be
printed.
3. Magnification
The magnification setting, which was set when the preview screen was displayed, is displayed. If
Preset ratio, Zoom (25 - 400%), or 100% is selected, you can change the magnification setting on
the preview screen.
Page top
Page 351 of 949 pages Displaying the Preview Screen