Canon PIXMA MP560 - Manual (Page 742)

Advanced Guide > About Bluetooth Communication > Bluetooth Settings > Bluetooth Settings Screen
Bluetooth Settings Screen
The screens may differ depending on the printer you are using.
1. Device name
Displays the device name of the printer to which the Bluetooth unit is attached.
Device name Screen
2. Access refusal
Selecting ON will disable searching of this printer by a Bluetooth-compatible device.
Access refusal Screen
3. Security
Select Enable and then specify the security mode to activate the passkey set on the Passkey screen.
Security Screen
4. Passkey
You can change the passkey. The passkey refers to an identification number to be determined. It is
used to prevent unwanted access from other Bluetooth devices. The initial value is set to 0000.
Passkey Screen
Device name Screen
Allows you to set the device name of the printer on a Bluetooth device.
Ex:
When you select MP990 series-2, the printer name displayed on the Bluetooth device is Canon
MP990 series-2.
The initial value is set to MP990 series-1.
Access refusal Screen
Page 742 of 949 pages Bluetooth Settings Screen