Rice Lake TransAct 5.0 - Installation & Operation Manual - Manual (Page 318)

307
Truck, Trailer, Tared Vehicle 3
Enter the ids of the vehicles being updated. The id fields are enabled for those vehicles
only and are initially set to the tared vehicles selected in the Weigh screen.
Tare Values
Enter the tare weights for the vehicles being updated. If the tare weight is for combined
vehicles, then enter the weight in the combined field. The weight is initially set to the
value in the active scale of the Weigh screen.
The tare update for a combined vehicle is not complete until the truck updates its tare. At
that point the tare weight for the other vehicle can be calculated and updated. Suppose the
combined tare for a truck and trailer is 36000 pounds. The truck drops off the trailer and
then updates its tare. Let’s say the truck tare is 33000 pounds. The trailer tare is then
3000 pounds.
Save button
Click this button to store the updated tare weights.
Done button
Click this button to return to the Weigh screen.