Rice Lake TransAct 5.0 - Installation & Operation Manual - Manual (Page 193)

182
FAQ
Okidata Printer Menu
OKI ML 320 Front Panel Menu
SEL*
Exit Group' Item' Set' Print'
Power Alarm Menu
* Indicates that this is a back lit word. When the word is lit the mode is active.
` Indicates that this becomes the button name in Menu mode. (Menu* light on)
Configuring OKI ML320
Enter Menu (configure mode) and Print Settings
1. Turn the printer on
2. Be sure SEL* light is off (press SEL/MENU button to turn on or off)
3. Press and hold SHIFT button then simultaneously press SEL/MENU button
4. The Menu* Light should now be on
5. Press the Print button to print the current Settings for all Items in all Groups
6.
Verify settings are similar to those listed (for the proper hardware configuration)
at the end of the document - if not make changes.
Exit Menu (configure mode)
1. Turn the printer on
2. Be sure SEL* light is off (press SEL/MENU button to turn on or off)
3. Press and hold SHIFT button then simultaneously press SEL/MENU button
4. The Menu* Light should now be off
Menu Buttons - Moving Through and Manipulating Options in the Menu