Rice Lake 720i Programmable Indicator/Controller - Installation Manual - Manual (Page 97)

Serial Commands 91
CONTACT.NAME1
CONTACT.NAME2 Contact names contact_names (up to 20 characters each)
CONTACT.PHONE1
CONTACT.PHONE2 Contact phone numbers contact_phone_numbers (up to 20 characters each)
CONTACT.EMAIL Contact e-mail address contact_e-mail_address (up to 30 characters)
CONTACT.NEXTCAL Next calibration date calibration_date
GRAVADJ Gravitational adjustment OFF, ON
LAT.LOC Latitude 0–90 (to nearest degree of latitude)
ELEV.LOC Elevation ±0–9999 (in meters)
Table 10-6. PFORMT Serial Commands
Command Description Values
GFMT.FMT
GFMT.PORT Gross demand print format string For .PORT commands, specify the port number as PORTxx (no leading
zero). For example: GFMT.PORT=PORT2.
For AUXFMT.FMT commands, specify the auxiliary format number (1—
20) as AUXFMTxx (no leading zero). For example:
AUXFMT.FMT#8=GROSS…
See Section 6.0 on page 52 for information about demand print format
strings.
NFMT.FMT
NFMT.PORT Net demand print format string
ACC.FMT
ACC.PORT Accumulator print format string
TRWIN.FMT
TRWIN.PORT Truck weigh-in print format string
TRWOUT.FMT
TRWOUT.PORT Truck weigh-out print format string
TR.FMT
TR.PORT Truck register print format string
ALERT.FMT
ALERT.PORT Alert format string
HDRFMT1
HDRFMT2 Ticket header format strings
AUXFMT.FMT#x
AUXFMT.PORT#x Auxiliary ticket format
Table 10-7. DIG I/O Serial Commands
Command Description Values
DON.b#s Set digital output on (active) at bit b, slot s. —
DOFF.b#s Set digital output off (inactive) at bit b, slot s. —
DIO.b#s Digital input function OFF, INPUT, OUTPUT, PROGIN, ZERO, NT/GRS,
TARE, UNITS, PRINT, ACCUM, SETPNT, TIMDATE,
ESC, CLEAR, DSPTAR, KEY0–KEY9, KEYDP,
ENTER, NAVUP, NAVDN, NAVLFT, NAVRGT,
KBDLOC, HOLD, BATRUN*, BATSTRT*, BATPAUS*,
BATRESET*, BATSTOP*, CLRCN, GROSS, NET,
PRIM, SEC, CLRTAR, CLRACC,
* 720i Batch Version Software only
Command Description Values
Table 10-5. FEATURE Serial Commands (Continued)