Rice Lake 720i Programmable Indicator/Controller - Installation Manual - Manual (Page 48)

42 720i Installation Manual
3.2.4 PFORMT Menu
The PFORMT menu can be used to set the port used by each print format. Print formats can be viewed or edited
using
Revolution III , serial commands or the front panel. See Section 6.0 on page 52 for detailed information about
print formatting.
GFMT NFMT ACCFMT
HDRFMT1 HDRFMT2 AUXFMT
TRWOUT TRFMT ALERT
Same as AUXFMT1
AUX1FMT AUX20FMT
PORT 2
PORT 4
PORT
...
PORT 2
PORT 4
PORT
SPFMT
720i
Batching Version
Software Only
FMT
SCALES SERIAL FEATURE PFORMT DIG I/O ALGOUT VERS SETPTS
720i Batching
Version only
see page 57
TRWIN
See GFMT Menu
Figure 3-15. PFORMT Menu