Rice Lake 720i Programmable Indicator/Controller - Installation Manual - Manual (Page 61)

Print Formatting 55
6.3 Customizing Print Formats
The following sections describe procedures for customizing print formats using the Revolution III configuration
utility or serial commands. See Section 11.5 on page 103 for information about custom stream formatting.
6.3.1 Using Revolution
The Revolution III configuration utility provides a ticket formatting grid with a tool bar. The grid allows you to
construct the ticket format without using the formatting commands ( and ) required by the front panel
or serial command methods. Using
Revolution III , you can type text directly into the grid, then select weight value
fields from the tool bar and place them where you want them to appear on the printed ticket.
Note
If you are using Advance Truck mode, expand all AUXFMT horizontal columns to a minimum of 80 columns
due to the size of the default formats.
Figure 6-1 shows an example of the Revolution III print formatting display.
Figure 6-1. Revolution III Print Formatting Display