Rice Lake 720i Programmable Indicator/Controller - Installation Manual - Manual (Page 21)

Installation 15
2.9.2 Panel Mount Controller
Table 2-7 lists replacement parts and parts kit contents for the 720i panel mount controller, including all parts
referenced in Figure 2-9 on page 16.
Table 2-7. Panel Mount Controller Replacement Parts
Ref Number PN Description (Quantity)
1 103314 Panel mount controller cover (1)
2 103677 Panel mount controller connector label (1)
3 101263 Enclosure, universal (1)
3 67796 Power supply cable assembly, to CPU board (1)
4 69291 3V Lithium coin battery
5 106788 720i CPU board assembly (PCE Version) (1)
6 14822 Machine screws, 4-40NC x 1/4 (10)
7 101264 Panel mount controller enclosure (1)
8 53308 Labels (2)
9 14825 Machine screws, 4-40NC x 1/4 (2)
10 103681 AC feed-through header (1)
11 16892 Ground/Earth label (1)
12 15601 Ground wire, 6 in w/ No. 8 eye connector (1)
13 67885 Standoffs, M-F 4-40NC x 1.25 (2)
14 67613 Power supply, ±6VDC, 25W (1)
15 85494 Power supply cover (1)
16 16861 High voltage warning label (1)
17 54206 Machine screw, fillister head, 6-32NC x 3/8 (1)
18 14626 Kep nuts, 8-32NC hex (2)
19 14839 Machine screws, 6-32NC x 1/4 (2)
20 53307 Label (1)
21 15134 Lock washers, No. 8, Type A (2)
22 71698 Polyurethane foam strip (1)
Panel Mount Controller Parts Kit Contents
104033 720i Software Toolkit CD (1)
15888 3-position terminal block (1)
71344 10-position screw terminal for J6 (1)
76513 4-position screw terminals for J3 and J5 (2)
76514 6-position screw terminals for J1, J2 and J4 (3)
14626 Kep nut, 8-32NC hex (1)
14862 Machine screws, 8-32NC x 3/8 (2)
15134 Lock washers, No. 8 Type A (7)
15694 No. 8 crimp connector (1)
53075 Cable shield ground clamps (4)
30623 Machine screws, fillister head, 8-32NC x 7/16 (2)
94422 Capacity label (1)