Rice Lake 720i Programmable Indicator/Controller - Installation Manual - Manual (Page 60)

54 720i Installation Manual
6.2 Default Print Formats
Table 6-2 shows the default print formats for the 720i and lists the conditions under which each print format is
used. The HDRFMT1 and HDRFMT2 formats are used to specify header information that can be used by the other
ticket formats. The contents of the HDRFMT
x format can be inserted into any other ticket format using the
and Revolution III or serial commands to view and edit print formats (see
Section 6.3 on page 55).
Table 6-2. Default Print Formats
Format Default Format String Used When
GFMT GROSS Normal mode, no tare in system
NFMT GROSSTARENET
Normal mode, tare in system
ACCFMT ACCUM Accumulator enabled and displayed
*SPFMT Setpoint print operation with PSHPRNT=ON
TRWIN IDGROSS
Press the Weigh In softkey, enter truck ID
number, and press Enter.
TRWOUT IDGROSSTARER2>NET Press the Weigh Out softkey, enter truck ID
number, and press Enter.
TRFMT REG ID: : SCALE Truck register currently displayed
ALERT —
HDRFMT1
HDRFMT2 COMPANY NAMESTREET ADDRESS
CITY, ST ZIP Must be inserted into other print format
AUXFMT.FMT#x
x=1-20
GROSS
See Table 7-5, “Default Print Formats for Advanced Truck,” on
page 61 Formats AUX1FMT—AUX20FMT
Note
In OIML and CANADA modes, the letters PT (preset tare) are automatically inserted after the printed tare
weight.
* 720i Batching Version only