12o2 changing room setpoints – KMC Controls STE-8000 series User Manual
Page 3
Room setpoints are changed using the buttons and
display on the front of the sensor.
1. Press any button to begin changing setpoints.
2. If required, enter Password 1. New installations do
not have a password.
3. When the display advances to the cooling setpoint,
press the up or down button to change the
cooling setpoint.
4. Press the setpoint
Set
Point
button to save the cooling
setpoint and advance to the heating setpoint.
5. Press the button to save the value or advance to
the next function.
6. When the display advances to the heating setpoint,
press the up or down button to change the
heating setpoint.
7. Press the setpoint
Set
Point
button to save the heating
setpoint and return to the temperature display.
Set
Point
7O
12O2
Changing room setpoints
- BAC-5801 (2 pages)
- CSP-4702 (4 pages)
- CEP-4703 (4 pages)
- HTO-1103 (8 pages)
- CSP-5001 (4 pages)
- CSP-5001 (21 pages)
- BAC-8001 Installation Guide (88 pages)
- BAC-8001 Quick start (2 pages)
- CCC-1001 (4 pages)
- CSC-3000 Series (2 pages)
- BAC-12xx63 Series FlexStat (9 pages)
- FlexStat Operation Guide (46 pages)
- FlexStat Quick Reference Guide (2 pages)
- BAC-12xx36 Series FlexStat (11 pages)
- CSC-2000 Series (4 pages)
- CEP-4000 Series (4 pages)
- BAC-4000 Series (4 pages)
- CTE-5202 (4 pages)
- CTE-5201-16 (4 pages)
- CTE-5100 Series (4 pages)
- CTE–1003 (2 pages)
- CTE–1005 (2 pages)
- CTE-1001 (2 pages)
- CTC-1611 (2 pages)
- CTC-1621 (2 pages)
- KMD-1162 (8 pages)
- KMD-1183 (1 page)
- KMD-1261 (10 pages)
- SAE-1011 (6 pages)
- SAE-1111 (9 pages)
- TPE–1464 Series(2004-2008) (6 pages)
- TPE-1464 Series(2008 and later) (3 pages)
- TPE-1483 Series(2008 and later) (3 pages)
- TPE-1483 Series(2004-2008) (6 pages)
- IEI-1001 (2 pages)
- SAE-1101(NEW Style Board) (5 pages)
- SAE-1101(OLD Style Board w/ LEDs) (8 pages)
- THE-1002 (2 pages)
- THE-1102 (2 pages)
- THE-1105 (2 pages)
- TTE-1001 (2 pages)
- SSE-1000 Series (2 pages)
- STE-1415 (2 pages)
- STE-1411 (2 pages)