beautypg.com

Dell PowerEdge FX2/FX2s User Manual

Page 172

background image

• The SSH server and client are enhanced to support the VRF awareness functionality. Using this

capability, an SSH client or server can use a VRF instance name to look up the correct routing table

and establish a connection.

Enabling SSH Authentication by Password

Authenticate an SSH client by prompting for a password when attempting to connect to the Dell

Networking system. This setup is the simplest method of authentication and uses SSH version 1.
To enable SSH password authentication, use the following command.

• Enable SSH password authentication.

CONFIGURATION mode

ip ssh password-authentication enable

Example of Enabling SSH Password Authentication

To view your SSH configuration, use the show ip ssh command from EXEC Privilege mode.

Dell(conf)#ip ssh server enable

Dell(conf)#ip ssh password-authentication enable

Dell# show ip ssh

SSH server : enabled.

SSH server version : v1 and v2.

SSH server vrf : default.

SSH server ciphers : 3des-cbc,aes128-cbc,aes192-cbc,aes256-cbc,aes128-

ctr,aes192-ctr,aes256-ctr.

SSH server macs : hmac-md5,hmac-md5-96,hmac-sha1,hmac-sha1-96,hmac-

sha2-256,hmac-sha2-256-96.

SSH server kex algorithms : diffie-hellman-group-exchange-sha1,diffie-hellman-

group1-sha1,diffie-hellman-group14-sha1.

Password Authentication : enabled.

Hostbased Authentication : disabled.

RSA Authentication : disabled.

Vty Encryption HMAC Remote IP

Using RSA Authentication of SSH

The following procedure authenticates an SSH client based on an RSA key using RSA authentication. This

method uses SSH version 2.

1.

On the SSH client (Unix machine), generate an RSA key, as shown in the following example.

2. Copy the public key id_rsa.pub to the Dell Networking system.
3. Disable password authentication if enabled.

CONFIGURATION mode

no ip ssh password-authentication enable

4. Bind the public keys to RSA authentication.

EXEC Privilege mode

ip ssh rsa-authentication enable

5. Bind the public keys to RSA authentication.

EXEC Privilege mode

ip ssh rsa-authentication my-authorized-keys flash://public_key

172

Security